Next LLOYD HALLWAY BENCH Assembly Instructions Manual

BEFORE YOU GET
No need to unpack everything, just check the first component.
If you're happy, then it's time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
Finally, double check you have all the pieces by referencing
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
DO
Check everything is there (the 'parts page'
Ÿ
is a handy checklist)
Ÿ Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
Wrap all the big components back up in
Ÿ
the original protective packaging.
Close up the box and seal it securely
Ÿ
(don't be afraid to use plenty of tape).
Then just give us a call on 0333 777 8999 and we'll sort out a pick up time for you.
STARTED
1. COLOUR
Make sure you're happy with the colour
2. PROTECTIVE PACKAGING
3. PARTS PAGE
the parts page of the instructions.
TIPS FOR RETURNS
...
DON'T
Ÿ Leave anything assembled -
all components should be dismantled
and separately packed.
Put loose fixtures and fittings straight
Ÿ
into the box.
Throw it back in the box carelessly –
Ÿ
as it may get damaged.