Incra Miter Express Owner's Manual

Owner's Manual
Owner's Manual
Miter gauge not included
Miter gauge not included.
saFeTY saFeTY
Important safety instructions for using the INCRA Miter Express
■ Before using the INCRA Miter Express, read and
follow all of the instructions and safety information in
this owner's manual.
■ When using the INCRA Miter Express in conjunction
with any other tool, first read and follow all instructions
and safety information in that tool's owner's manual.
■ Never let the saw blade come in contact with the
aluminum or steel components of the INCRA Miter
Express.
■ Before making any cut, always make sure that the
INCRA Miter Express cutoff drop panel is locked
securely in the miter slot.
■ When using the INCRA Miter Express, always keep
your hands clear of the saw blade and the line of cut.
■ Always turn off the power and make sure that the saw
blade comes to a complete stop before changing the
setting of any part of the INCRA Miter Express.
Upgrades your miter gauge to a sled for increased accuracy,
control and safety on work pieces large and small.
Another innovation in precision from INCRA
■ Always securely tighten your miter gauge's clamping
knob before starting any cut.
■ Wear safety glasses, hearing protection, and follow all
normal shop safety practices.
■ After making any adjustments to the miter angle or
fence position of your miter gauge, always verify safe
clearance between the blade and fence before turning
on the saw.
■ After making any adjustments to the fence position on
the INCRA Miter Express, always make sure that all
knobs and fasteners on the fence mounting bracket
and the outboard fence lock are securely tightened.
■ When using a stop to position a piece for a cut, always
hold or otherwise clamp the board between the stop
and the blade.
■ Always make sure the arrows on the Miter Express
caution label point toward the table saw blade.
®