Sustain/Mod Buttons - Korg nanoKEY2 Parameter Manual

SUSTAIN/MOD buttons

Button Enable [Disable/Enable]
This specifies whether the buttons will be enabled or disabled.
If the buttons are disabled, no MIDI message will be transmitted when they are pressed.
Button Behavior [Momentary/Toggle]
This chooses one of the following two ways for the button to behave.
Momentary
A control change message with the On Value will be transmitted
when you press the button, and with the Off Value when you
release the button.
Toggle
Each time you press the button, a control change message with
the On Value or the Off Value will be alternately transmitted.
Control Change Number [0...127]
This specifies the control change number of the control change message that is trans-
mitted.
On Value [0...127]
This specifies the value of the control change message that is transmitted when the
button is turned on.
Control change messages will be transmitted when you use the SUSTAIN or MOD buttons.
With the factory settings, control change number 64 (sustain) is assigned to the SUSTAIN button, and control change
number 1 (modulation) is assigned to the MOD button.
Here you can specify whether these buttons will be enabled or disabled, how they will function, their control change
numbers, the values that will be transmitted when the buttons are turned on/off, and the how quickly the on/off value
will be reached when the buttons are pressed.
These MIDI messages are transmitted on the Global MIDI Channel (p.4).
7
Off Value [0...127]
This specifies the value of the control change message that is transmitted when the
button is turned off.
Switch Speed [Immediate/Fast/Normal/Slow]
This specifies how quickly the On/Off Value will be reached after you press the but-
ton. "Immediate" is the fastest response, and "Slow" is the slowest. If you choose
"Immediate," the On/Off Value will be reached instantly.
On Value
Off Value
Press
The nanoKEY2's parameters
Immediate
Fast
Normal
Slow
Time
Release