Advertisement
Quick Links
Advertisement
Related Manuals for Langria 177886201
Summary of Contents for Langria 177886201
- Page 1 5-TIER WIRE SHELVING UNIT Assembly Instructions...
- Page 2 Please check and make sure that you have all the parts ready before beginning PARTS LIST assembly Parts Shelf Top Post Photo Parts Middle Post Down Post Photo Parts Clip Leveling Foot 48/2(Spare) This disk is just for protecting component parts from damage during shipping and can be discarded after assembly.
- Page 3 ASSEMBLY STEPS Step 1 Screw the leveling feet into the bottom of down posts. Down Posts Leveling Foot EN-2...
- Page 4 Step 2 Snap clips (for the bottom tier) at the desired height onto the down posts. Down Posts Count the grooves in the posts to make sure the clips are level. Clip Arrow Groove Down Posts Make sure rib on clip fits into a groove on the post.
- Page 5 Step 3 Slide a shelf down the bottom posts through the tapered openings in its corners until it is resting on the clips. Shelf Down The wider end of the tapered opening should go toward the bottom. EN-4...
-
Page 6: Leveling Foot
Step 4 Tap the shelf (with a mallet on a cloth) in the corners to make sure it is snug over the clips. Shelf Adjust the leveling feet if placed on an uneven ground. Leveling Foot EN-5... - Page 7 Step 5 Install the middle posts and then the top posts. Top Post Insert Middle Post Insert Down Post EN-6...
- Page 8 Step 6 Insert the remaining shelves.Refer to Steps 2 & 3 & 4, working from bottom to top. EN-7...
- Page 9 E-mail: support@langria.com...