Advertisement
Quick Links
Advertisement
Related Manuals for Langria 3-TIER WIRE BAKER’S RACK
Summary of Contents for Langria 3-TIER WIRE BAKER’S RACK
- Page 1 3-TIER WIRE BAKER’S RACK Assembly Instructions...
-
Page 2: Parts List
Please check and make sure that you have all the parts ready before begin- PARTS LIST ning assembly Parts Shelf with Railing Below* Shelf with Railing Above* Small Shelf * Photo Parts Front Top Post Back Middle Post Back Top Post Photo Parts Down Post... -
Page 3: Assembly Steps
ASSEMBLY STEPS Step 1 Screw the leveling feet into the bottom of down posts. Down Post Leveling Foot EN-2... - Page 4 Step 2 Snap clips (for the bottom tier) at the desired height onto the down posts. Down Post Count the grooves in the posts to make sure the clips are at the same height. Clip Arrow Groove Down Post Make sure rib on the clip is fitted into a groove on the post.
- Page 5 Step 3 Slide B down the bottom posts through the tapered openings in its corners until it is resting on the clips. Shelf The wider end of the tapered opening Down should go toward the bottom. EN-4...
- Page 6 Step 4 Tap the shelf in the corners (covered with a cloth and use a mallet) to make sure it is snug over the clips. Shelf Adjust the leveling feet if placed on an uneven ground. Leveling Foot EN-5...
- Page 7 Step 5 Install B. Refer to Steps 2 & 3 & 4. EN-6...
- Page 8 Step 6 Install the front top post and back middle post and then the back top post. EN-7...
- Page 9 Step 7 Install A. Refer to Steps 2 & 3 & 4. EN-8...
- Page 10 Step 8 Install the hook rail and then the small shelf. Refer to Steps 2 & 3 & 4. Place the board on the first tier of the unit. EN-9...
- Page 11 E-mail: support@langria.com...