TP-Link Archer XR500v User Manual page 8

Chapter 1
LED
Power
GPON
LOS
Internet
2.4GHz
5GHz
WPS
LAN
PHONE
LED Explanation
Status
On Power is on.
Off Power is off.
On The router is registered with the ISP.
Flashing The router is trying to register with the ISP.
Off The router is not yet registered with the ISP.
On The router is unable to transmit optical signal.
No optical signal is received or the received signal
Flashing
is too weak.
Off The router is receiving optical signal properly.
On Internet connection is available.
Flashing The router is transmitting or receiving data .
Off No Internet connection.
On The 2.4GHz wireless radio band is enabled.
The router is transmitting or receiving data via 2.4GHz
Flashing
band.
Off The 2.4GHz wireless radio band is disabled.
On The 5GHz wireless radio band is enabled.
The router is transmitting or receiving data via 5GHz
Flashing
band.
Off The 5GHz wireless radio band is disabled.
Turns on when a WPS synchronization is established and
On/Off
automatically turns off about five minutes later.
A wireless device is trying to connect to the network via
Flashing WPS.
This process may take up to 2 minutes.
A device is connected to the LAN port but no data is
On
being transmitted.
Flashing The LAN port is sending or receiving data.
Off No device is connected to the LAN port.
On The phone is off-hook.
Flashing The phone is ringing.
Off The phone is on-hook.
Get to Know Your GPON Router
Indication
4