TP-Link Archer XR500v User Manual page 19

Chapter 4
4 Select your WAN Interface Name
(Edit) icon.
5 Scroll down the page, enable IPv6, and configure the IPv6 parameters.
• Addressing Type: Consult your ISP for the addressing type
SLAAC is the most commonly used addressing type.
• IPv6 Gateway: Keep the default setting as
Note: If your ISP has provided the IPv6 address, click
specified by ISP and enter the parameters provided by your ISP.
6 Click Save to make the settings effective. Now IPv6 service is available for your
network.
(Status should be Connected) and click the
Current Connection.
Advanced to reveal more settings. Check to use IPv6
Set Up Internet Connections
(DHCPv6 or SLAAC).
15