Advertisement
5. Tighten the screws and place the vinyl cover back into the correct
location.
6. To install the sensor in the ceiling, fold the metal springs upwards until
they are in a "l" position, then push the sensor into the ceiling hole or
installation box and release the springs to set the sensor in the installed
position.
7. Once installed, connect the sensor to the power and test.
Test
•
Turn the 'Time' switch anti-clockwise for
minimum.
•
Turn the 'Lux' switch clockwise for
maximum.
•
Once the power is turned on the sensor will take 30 seconds to warm
up and will then enter working mode.
520.001UK User Manual
Advertisement
