Advertisement
Function
The sensor will automatically identify day and night.
The ambient light can be adjusted to your desired setting.
When the switch is turned to 'SUN' (max) the sensor will work
in both at daytime and at night.
When the switch is turned to 'MOON' (min) the sensor will only work under less
than 10 Lux.
As for Adjustment please refer to the testing section.
Time-delay adjustment can be altered to your required setting.
Connection Test Figure
Installation
1. Turn off the power
2. Remove the transparent vinyl cover located at the bottom of the
sensor.
3. Loosen the screws in the connection terminal.
4. Connect the power and rated load to connection terminal of sensor
using the connection sketch map.
520.001UK User Manual
Advertisement
