Thermostat; Basic Operations - Ferroli CONNECT Installation And Use Manual

5.7 Thermostat

5.7.1 Basic operations
1. Press the "mode"
a. Off
: in this mode the heat request is disabled; only the frost protection mode
remains active.
b. Vacation
number of days set via the buttons
c. automatic
APP. If the program has not been set, the system default one is used.
d. Manual
2. Temperature setting:
a. Manual: press the buttons
3. settings menu: press "set"
a. " and
b. "set"
c. "mode"
4. In case of a boiler fault, the error code is also shown on the thermostat display. It is
possible to reset the fault via the "set"
For a description of the fault, refer to the boiler handbook.
button to switch between the various modes:
: the set temperature is that of frost protection energy saving for a
: the required temperature is that of the weekly program set via
: the temperature is set manually, directly on the thermostat.
" scroll the menu
access the selected parameter
return to the main menu
cod. 3541S180 - Rev. 05 - 10/2019
.
.
for about 2 seconds to access the settings menu.
button.
49
EN