Page 2
A. You bought your AviTrac® acoustic bird repeller directly from AgriProTech Your warranty is automatically activated. B. You bought your AviTrac® acoustic bird repeller from one of our resellers It is really easy to benefit from the 1 year AgriProTech manufacturer warranty: 1.
AviTrac® Operating Instructions You have acquired an AviTrac® acoustic bird repeller. These operating instructions will help you get the most out of your device. Please follow these operating instructions and keep them for future reference. Your AviTrac® kit includes: Caution: The green seal protecting the...
I – The different elements of your AviTrac® acoustic bird repeller 1. Package Transparent door protecting electronic box 2. Key lock (optional) 3. Rustproof metal chassis 4. Speaker (may vary depending on model) 5. Speaker output 6. Electronic box (see close-up below) 7.
If you want to use your AviTrac® plugged into an outdoor power supply, you will have to use a waterproof cable, available in 5 meters (ref 0961) or 10 meters (ref 0962). Please do not hesitate to ask your local distributor for these references.
III - Installation 1. Stainless steel stand In your package, you find the parts needed to build the stainless steel chassis for your AviTrac® acoustic bird repeller. It is composed of the following parts: Reference used Quantity Illustration in the...
Picture 4 Screw the rear plate to the feet and rails 2.a Installation of the speaker for AviTrac® 9M and 18M Make sure the speaker is stabilized on the top of the rear plate (above the central hole, Picture 5) and screw the screw B2 to wing nut B3 as shown in the illustrations below (Picture 6 and Picture 7).
“programmable” alarm or the “luminosity” alarm. To start programming the device, press and hold the OK button for 4 seconds (until the AviTrac® screen lights up). You can access the menu quickly by pressing the OK button again. Information about the device identification (version of the device and software) appears.
Press OK button to confirm your choice and go to the next menu. Activation of the It is possible to program the AviTrac® device based on sunrise and sunset. The “luminosity” alarm “luminosity” alarm needs to be activated in order for emissions to start and stop depending on the luminosity sensor data.
In order to avoid battery damage, please make sure you do not let the battery fully discharge. When the AviTrac® is used on an everyday basis, recharge it every 3 weeks and make sure it is fully charged before turning it off for storing when not in use.
Finally, the acoustic bird repeller is more effective when it is used preventively. To prevent a bird habituation effect, remember to move your AviTrac® device, even by a few meters, and change the programmed sounds regularly (at least once a week).
Need help?
Do you have a question about the AviTrac and is the answer not in the manual?
Questions and answers