Rgb Illumination Adjustment - Pioneer AVIC-D3/XU/UC Service Manual

5

6.7 RGB ILLUMINATION ADJUSTMENT

[Operational specifications]
• Method1
If the monitor microcomputer is reset by double pressing of the SOURCE key + the [|<<] key, the following screen will
be displayed on the OSD.
0
0
P
8
At this time, if the keys are pressed in the order of SOURCE
the [RGB illumination test mode].
• Method2
If the monitor microcomputer is reset with the [ILMTEST] terminal set to Low, the system will proceed to
the [RGB illumination test mode].
(You can get the same result by resetting, but it is not recommended as you will lose the user data.)
*) When the succession is made by the terminal, the OSD display screen below will not be displayed.
• The key operations under this test mode are as follows.
(1): Main body key
Key
SOURCE
Page turning
MENU
Upward search of selection item If pressed when the cursor is pointing the top item in a page, the cursor will move to the lowest item.
MAP
Downward search of selection item If pressed when the cursor is pointing the lowest item in a page, the cursor will move to the top item.
|<<
Adjustment value DOWN on the selected item
>>|
Adjustment value UP on the selected item
(2): Remote controller key (CXC6317 SW1 : AVH, SW2 : AVH)
Key
MENU
Page turning
Upward search of selection item
Downward search of selection item
Adjustment value UP on the selected item
Adjustment value DOWN on the selected item
• A method to cancel [RGB illumination test mode] is described below.
ACC OFF ON. (BUP OFF
*) The preset value is first written in the EEPROM, then read out and displayed.
5
6
L E A S E P U S
Operation
The screen succeeds in the order of [RGB preset 1 setting mode] [RGB preset 2 setting mode]
[RGB preset 11 setting mode] [RGB preset 12 setting mode] [RGB preset 1 setting mode].
In the case of ON/OFF setting item, set to OFF.
In the case of ON/OFF setting item, set to ON.
Operation
The screen succeeds in the order of [RGB preset 1 setting mode] [RGB preset 2 setting mode]
[RGB preset 11 setting mode] [RGB preset 12 setting mode] [RGB preset 1 setting mode].
If pressed when the cursor is pointing the lowest item in a page, the cursor will move to the top item.
If pressed when the cursor is pointing the top item in a page, the cursor will move to the lowest item.
In the case of ON/OFF setting item, set to OFF.
In the case of ON/OFF setting item, set to ON.
ON will do too.)
6
7
H T H E [
>>| MENU |<<, the system will proceed to
AVIC-D3/XU/UC
7
8
R E S E T ]
Remarks
Remarks
8
A
31
B
C
D
E
F
215