Diseqc Setting - TechniSat SKYRIDER 65 Instruction Manual

12.5

DiSEqC setting

By default, DiSEqC is turned off. If you want to use DiSEqC, your connected receiver must support at least DiSEqC 1.0 or DiSEqC
1.1 and its satellite configuration must be set according to the tables below.
> To enable or disable the DiSEqC function in the controller, press the DiSEqC button on the controller for 2 seconds.
The DiSEqC function can only be activated / deactivated in the Home position of the satellite system.
The current status is indicated by the DiSEqC LED on the controller.
54
No. Position / Option
1 A / A
2 A / B
3 B / A
4 B / B
No. LNB
1 LNB 1
2 LNB 2
3 LNB 3
4 LNB 4
5 LNB 5
6 LNB 6
7 LNB 7
8 LNB 8
9 LNB 9
DiSEqC 1.0
Satellite
ASTRA 19.2° East
Eutelsat 13.0° East
Astra 23.5° East
Astra 28.5° East
DiSEqC 1.1
Satellite
Türksat 42.0° East
Astra 28.5° East
Astra 23.5° East
ASTRA 19.2° East
Eutelsat 13.0° East
Eutelsat 9.0° East
Astra 4.9° East
Thor 0.8°West
Eutelsat 5.0°West