Odorfree Charcoal Filter - Miele DA 2360 Operating And Installation Instructions

Cleaning and care
 Use a commonly available household
dishwashing detergent.
 In a Miele dishwasher use the
"Normal" program.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the grease
filters in any way.
After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the filters for
cleaning, also clean off any
accessible oil or fat buildup from the
housing. Doing so will prevent a fire
hazard.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.
20

OdorFree Charcoal Filter

With recirculation mode, two charcoal
filters must be installed in addition to
the grease filters. These are designed to
absorb cooking odors.
The charcoal filters are installed in the
canopy above the grease filters.
Charcoal filters are available to order via
the Miele Web Store, Miele Technical
Service (see end of this manual for
contact details), or from your Miele
dealer.
You will need to order a DKF 19-1
charcoal filter set. This set contains
two charcoal filters.
How to install/replace a charcoal
filter
 Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
 Remove the charcoal filters from their
packaging.