Nederlands Inhoudsopgave EU-conformiteitsverklaring Pakketinhoud Vooraf Voorzorg en veiligheid Meer informatie Zigbee-netwerk Installatie Gebruik Het gedrag van de status LED English Table of content EU declaration of Conformity In the package Before you start Precautions and safety More information Zigbee network Installation Controls LED behavior...
Copyright 2018, Plugwise. Alle rechten voorbehouden. EU-conformiteitsverklaring Plugwise B.V. verklaart hierbij dat dit Oude elektrische en elektronische product voldoet aan de benodigde apparaten bevatten vaak waardevolle vereisten van de desbetreffende Europese materialen. Plaats een afgedankt apparaat richtlijnen, waaronder 1999/5/EC dan ook nooit bij het gewone afval.
(Home Automation 1.2). In deze handleiding wordt in het kort uitgelegd hoe je Lisa installeert. Daarnaast wordt kort uitgelegd hoe je Lisa toevoegt aan het Plugwise Home Automation (HA) systeem. Voeg je Lisa toe aan een ander systeem? Raadpleeg Muurplaatje...
Lisa gedraagt zich als een “Sleepy end device” (SED). Meer informatie Meer informatie over Lisa vind je op onze Zigbee router website plugwise.com/lisa. Sleepy end device Zigbee gateway Internet Zone-thermostaat | 5...
Installatie 1. Sluit de voeding aan USB-adapter Kies of je Lisa wilt gebruiken met een USB-adapter of met batterijen. Wil je Lisa gebruiken in combinatie met de USB-adapter? Dit is alleen Wil je later wisselen? Verwijder Lisa uit mogelijk als je Lisa plaatst op de het netwerk en installeer Lisa opnieuw standaard om Lisa in de kamer neer te in het netwerk, voorzien van de juiste...
Page 7
Adam is verbonden: » open de HTML-interface in de app, Voeg je Lisa toe aan een ander » of ga naar connect.plugwise.net en systeem? Raadpleeg hiervoor de log in met het ID van Adam. handleiding van de gateway waar je Lisa bij wilt aanmelden.
Page 8
» Niet bij de radiator op dezelfde plek in de ruimte laat » Niet in de keuken (vlakbij de oven) staan. Alleen dan kan de Plugwise » Niet naast elektrische apparaten zoneregeling van Adam goed regelen aan de hand van de temperatuur-...
Gebruik Muurplaatje Lisa heeft op de voorkant drie knoppen om Wil je Lisa liever aan de muur hangen? de ingestelde temperatuur en presets te Gebruik dan het muurplaatje. wijzigen. Dit is alleen mogelijk als je Lisa hebt geïnstalleerd in combinatie met batterijen. Met de linker- en rechterknop stel je per 0,5°C de temperatuur lager of hoger in.
Page 10
knop ingedrukt houdt. Zo kun je eenvoudig getal boven de lijn tijdelijk naar de de seconden meetellen. ingestelde temperatuur, het thermometer- icoon verdwijnt. Afhankelijk van de situatie worden een of meerdere icoontjes getoond. Drukknop Verwijder Lisa uit het netwerk • Druk de knop op de achterkant 3 seconden in en laat los.
De batterijen zijn bijna leeg. Rood 1 Keer knipperen (0,5 seconde) Lisa begrijpt het patroon niet dat wordt ingedrukt op de knop. Rood Snel knipperen De knop is ingedrukt. (aan: 0,1 seconde/seconde) Kijk voor support op plugwise.com/support Zone thermostat | 11...
Installation manual This document contains the installation procedure and functional description of this product. More information about the Plugwise zone thermostat can be found on our website plugwise.com. Copyright 2018, Plugwise. All rights reseverd. EU declaration of Conformity Plugwise B.V. hereby declares that this...
Lisa. In addition we briefly explain how you can add Lisa to the Plugwise Home Automation (HA) system. Do you want to add Lisa to another system? Please consult the manual of the system you want to connect Lisa to,...
USB adapter at the same time! power saving “sleep” mode, allowing longer battery life. Lisa will behave like a “Sleepy end device” (SED). More information More information about Lisa can be found on our website plugwise.com/lisa. Zigbee router Sleepy end device Zigbee gateway Internet...
Installation 1. Connect the power supply USB adapter Please decide if you want to power up Lisa using an USB adapter or batteries. Do you prefer to use Lisa with the USB adapter? This is only possible when Do you want to switch the power using the supplied desk stand to place supply later? Remove Lisa from the Lisa in the room.
Page 16
Zigbee gateway you want Lisa to connected: connect to. » open the HTML interface in the app, » or go to connect.plugwise.net and log in with the ID of Adam. • Go via the menu to Setup to add an appliance.
Page 17
» Not next to a radiator keep Lisa at the same spot in the room. » Not in the kitchen (near the oven) Only then the Plugwise regulation of » Not near to electrical appliances Adam is able to regulate the room...
Controls 3. Position Lisa Wall mount Lisa has three buttons on the front to Do you prefer to place Lisa on the wall? Use change the setpoint temperature and the the wall mount. active preset. • Screw the wall mount on the wall. With the left- and right button you can decrease or increase the setpoint •...
Page 19
button is pressed. This helps you counting When changing the setpoint temperature, the seconds. the set temperature will temporarily be shown above the line, and the thermometer icon will be hidden. Depending on the situation one or more of the following icons will be shown.
Quickly blinking (3 seconds) The batteries are almost empty. 1 Blink (0,5 second) Lisa does not understand the pattern that has been pressed. Quickly blinking The button is pressed. (on: 0,1 second/second) Need support plugwise.com/support 20 | Zone thermostat...
Need help?
Do you have a question about the Lisa 158-01 and is the answer not in the manual?
Questions and answers