Canon EOS REBEL T8i Advanced User's Manual page 614

21: No address assigned by DHCP server
What to check on the camera
On the camera, IP address is set to [Auto setting]. Is this the correct setting?
• If no DHCP server is used, specify the settings after setting the IP address to
[Manual setting] on the camera (
What to check on the DHCP server
Is the power of the DHCP server on?
• Turn on the DHCP server.
Are there enough addresses for assignment by the DHCP server?
• Increase the number of addresses assigned by the DHCP server.
• Remove devices assigned addresses by the DHCP server from the network to
reduce the number of addresses in use.
Is the DHCP server working correctly?
• Check the DHCP server settings to make sure it is working correctly as a DHCP
server.
• If applicable, ask your network administrator to ensure the DHCP server is available.
).
614