Safety Instructions - Honeywell MPD31D User Manual

Safety instructions

Observe the following precautions when using the
printer
Attention Do not disassemble the printer yourself, please read this
manual carefully before using
Warning Turn off the power immediately after a fault. When you find
the printer or charger smoke or smell, please unplug the
charger and remove the battery, be careful to avoid being
burned.
Warning Do not use the printer near flammable materials such as
gas stations or fuel depots.
Warning Always place the printer and charger in a ventilated
environment at an ambient temperature of -5 ° C to 50 ° C
and always use the charger supplied by the dealer. Using an
unapproved charger may be dangerous, while also violating
the provisions of the warranty terms.
Attention Do not open the paper cover while the printer is printing,
otherwise unpredictable conditions may occur and the
printer may be damaged.
Attention After the printing, the print head is still in a high
temperature state, do not touch, so as not to burn.
Attention Do not use solvents such as benzene or thinner to wipe the
printer. Do not touch the printer with corrosive chemicals or
cleaning agents. Use only a clean, soft cloth to gently wipe
the printer.
Attention Use only original or approved paper, as this may result in
poor print quality or damage to the printer core.
Attention If you store the printer for an extended period of time, make
sure to remove the battery from the printer and store it
separately. Failure to do so may cause the battery to fail, or
even leak, and damage the printer.
Attention Before changing batteries, please power off the printer and
cut off the power if connecting the printer with power adapter.
3