c. Attaching the Pail
Pail Hangers
Figure E
d. Adjust leg height
Metal
Tab
Figure F
IV. Taking Care of Your Uplift Commode Assist
Cleaning: Use a soft cloth and warm soapy water. Be sure to dry thoroughly.
Important: Check hardware regularly to ensure all nuts and bolts remain secure.
▪ The bucket is easily installed by sliding the
bucket along the rails of the bucket Hanger.
The hanger rails are located just below the
front cross bar, as shown in (Figure E).
▪ Occasionally in shipping, the rails may come
out of place. Ensure the bolts securing the rails
are flush with the front cross bar, so that the
rails hang below the unit.
▪ Next adjust the legs for the users' height. All
four legs can be adjusted by pushing in the
metal tab and lengthening or shortening the leg
as appropriate.
▪ The proper height for the Commode Assist is
the highest height that the user can sit on the
Commode Assist, with the seat in the flat, or
locked position, and still have their feet firmly
planted on the ground (Figure F).
▪ Ensure that the leg height is at the same
setting for all four legs.
5
Need help?
Do you have a question about the Uplift Commode Assist and is the answer not in the manual?
Questions and answers
DO I CUT THE TIES ONTHE METAL PLATES