Connecting To The Vcr - JVC LT-32DH8ZG Instructions Manual

Chapter 2 >> Connecting Your TV

Connecting to the VCR

English-
Using the SCART Cable

Connect the SCART cable between the EXT- (or EXT-2) jack on TV and
the SCART jack on your VCR.
2
Turn on the TV, and then press the AV button to select EXT- (or EXT-2).

Turn on your VCR, then insert a video cassette into the VCR and press the
PLAY button on your VCR. (Refer to the VCR owner's manual)
If you want to make a copy from a secondary VCR (or DVD player)

Connect your secondary VCR (or DVD player) to the EXT- jack and the
target VCR (or DVD player) to the EXT-2 jack so that the signal transfers
from EXT- to EXT-2.
2
To record a programme, connect the receiver to the EXT- jack and the VCR
(or DVD player) to the EXT-2 jack so that the signal transfers from EXT- to
EXT-2.
Note: For more details about how to record, refer to your required Equipment's
instructions.
Main Input
Digital TV
Analog TV
EXT-1 CVBS
RGB
(SCART1)
EXT-2 CVBS
RGB
(SCART2)
EXT-3 (Component)
EXT-4 (CVBS Side)
EXT-4S (S-VIDEO Side)
EXT-5 (HDMI1)
EXT-6 (HDMI2)
EXT-7 (PC)
Note: During recording, EXT-1 output is fixed to Digital TV only. When changing
the main input from Analog TV to EXT-5 or EXT-6, EXT-1 outputs nothing (A/V
are muted).
SCART cable
EXT-
(SCART) Output
Digital TV
Analog TV
Previous RF
(Digital TV/Analog TV)
VCR
EXT-2
(SCART2) Output
Digital TV
Analog TV
EXT-1 (CVBS)
EXT-1 (CVBS)
EXT-2 (CVBS)
EXT-2 (CVBS)
A/V MUTE
EXT-4 (CVBS Side)
EXT-4S
(S-VIDEO Side/Y+C)
A/V MUTE
A/V MUTE
A/V MUTE