Blaupunkt TORONTO RDM 126 Operating Instructions Manual page 6

7 Display
a
k l
d e f g i h j m
b
p
c
a) NDR2 - Station name
b) VIVALDI - CD name or
c) 1 : 52 - CD time (playback time)
and number for changer op-
eration (optional)
d) FM - Waveband
e) 6 - Preset button (1-6)
f) I, II, T - Memory bank I, II or
Travelstore
g) CD-IN - A CD is inserted
h) - Stereo
i) lo - Seek tuning sensitivity
j) AF - Alternative frequency for
RDS operation
k) TA - Priority for traffic stations
l) TP - A traffic station is being re-
ceived
m) PTY
n) MIX
o) TPM
p) T5
8 KeyCard theft protection system
To operate the set it is necessary that
n
the KeyCard is inserted.
o
KeyCard
For this purpose, introduce the
KeyCard (with the contact area show-
ing up) into the slot above the tongue
sticking out of the unit.
To remove the card, press first to un-
lock.
Read also the information in chapter
"KeyCard theft protection system".
Flashing KeyCard tongue
When the radio is turned off and the
KeyCard removed, the KeyCard
tongue can be programmed to flash for
optical theft protection.
For more information see chapter
"DSC programming".
- Programme type function
- CD playback in random or-
der
- To select and store CD ti-
tles
- Track no. 5 is played back
This flashlight can be switched off by
pushing in the tongue and lock.
9 SC/MIX
Radio operation
Scan
Press SC/MIX briefly –
"FM SCAN" and the name of the
scanned station will alternately appear
in the display. The unit will scan all sta-
tions which can be received.
Preset Scan
Press SC/MIX for approximately two
seconds until you hear a beep.
"SCAN" and the name of the scanned
station will alternately appear in the
display. The unit will scan all stations
stored on the preset buttons.
To stop Scan / Preset Scan:
Press SC/MIX once again.
CD operation
MIX playback
The Mix function is switched on if
"MIX" appears in the display. The CD
tracks will be played at random.
To switch Mix on and off:
Press SC/MIX briefly.
33