Advertisement
3. Install the SLI bridge, if necessary: Connect the SLI
bridge to the top of the graphics cards.
5. Plug the power cord and any additional cables into the
back of the computer.
© Copyright 2017 HP Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: April 2017
PRINTER: Replace this bo x with Pr inted- In (PI)
Statement(s) as p er sp ec.
NOTE: This box is simply a p laceho lder. PI
Statement(s) do n ot ha ve to fit insid e the b ox
but sh ould be placed in this area .
936167-001
4. Position the access panel back into place on the side
of the computer (1), and then slide the release latch to
the locked position (2).
6. Press the power button to turn on the computer.
4
Advertisement
