Advertisement
Quick Links
Advertisement
Related Manuals for Jetpik JP-50
Summary of Contents for Jetpik JP-50
- Page 1 Jetpik Model JP-50/200 Power Floss System...
- Page 2 1. Important safeguards. 2. Appliance description. 3. Getting started. 4. Care of your Jetpik unit. 5. Troubleshooting. 6. Limited warranty.
- Page 3 To avoid the risks of electric shock, personal injury or fire: Do not plug the charger into a voltage that is different from the voltage specified on the device or charger. The adapter for Jetpik is designed to work within a range of 100 to 240 AC Volts.
- Page 4 The charger for Jetpik is designed to be linked to standard USB output which is 4.75 to 5.25 V DC. Please don’t plug the charger to any other voltage that may cause damage to the equipment. Do not use this appliance if it has been dropped into water or other liquid and is not working properly. Contact Jetpik or your local dealer, which can be found at www.jetpik.com.
- Page 5 Jetpik is a personal care device and is not intended for use on multiple patients or in a dental practice or institution. ...
- Page 6 Contact your dental professional if excessive gum bleeding occurs after using this appliance or if bleeding continues to occur after one weeks use. Discontinue using Jetpik and contact a physician/dentist if discomfort or pain is experienced. Consult your physician if you have any other medical concerns.
- Page 7 Nozzle release button On/off button Pressure setting Brush (JP200 only) Display Nozzle Water inlet Battery...
- Page 8 ① Nozzle ② Floss capsule ③ Handle ④ Charger ⑤ AC Adapter ⑥ Travel case ⑦ Water supply tube ⑧ UV Sanitizer ⑨ Cup...
- Page 9 Initial Battery Charging Initial charge of Jetpik should be 24 hours. To do so, connect the charger to your mains socket and place the handle onto the cradle. A steady LED (or flashing LED for the Rev0 version) will indicate that the power is on and the unit is charging. Usually it will take 8 hours...
- Page 10 When using the Jetpik cup, insert the quick connector of the extendable hose on the lower base of the cup to the water inlet on the Jetpik handle and pull the tube to a comfortable length and fill the cup with water. (See below Figure 1) ...
- Page 11 Fig1 Push Fig2 Push Prime the floss: Press and move the pressure adjust button to the top III position, aim the nozzle into the sink and press the On/Off button. Wait a few...
- Page 12 seconds until the water projects from the nozzle and the string floss begins pulsating from the capsule. Once done, turn off the unit by pressing the On/Off button again. Using. If you have never used a water irrigator before, it is recommended to start at a lower setting by adjusting the pressure adjust button to the I position.
- Page 13 Battery Using the Power brush function (JP200 series) 1. Clip the power toothbrush head to your Jetpik handle as shown. If you have the jet nozzle attached, you will have to replace it with the brush head. 2. Apply a comfortable amount of toothpaste onto the brush and make contact with your teeth surface. Press the On/Off button...
- Page 14 3 pauses to notify you regarding the recommended cleaning time has been reached. On/off button Brush (JP200 only) Nozzle Display Battery 2 min 4．Taking care of your Jetpik unit. Always empty the cup and keep your Jetpik dry if it is not going to be used for a length of time.
- Page 15 Use tap or pure water to rinse out your unit if you have used it to deliver mouthwash or antibacterial solutions. Turn on the unit for few seconds to let the remaining water empty before you put the unit into the travel case. Using the UV Sanitizer (OPTIONAL) Some models are equipped with the UV sanitizer designed to clean your nozzles and tooth brush heads.
- Page 16 Disposal When the appliance reaches the end of its life cycle, please remove the rechargeable battery from the handle prior to disposal by puncturing and opening the plastic cover. Once opened, cut the wires attaching the battery to the handle and recycle or dispose of the battery based on your local regulations.
- Page 17 Problem Cause Corrective action Jetpik is turned on but no water is 1. There is no floss capsule is in nozzle or the 1. Insert a new capsule into the nozzle coming out of the nozzle. capsule is too old to function.
- Page 18 6．Limited Two-Year Warranty Jetpik is warranted to the original consumer to be free from defects in materials and workmanship for 2 years from the date of purchase. Consumers will be required to submit the original purchase receipt and the entire appliance to support a warranty claim.
- Page 19 Jetpik. Correct use and installation is the responsibility of the consumer and is not covered by the warranty. This limited warranty excludes accessories and supplies such as, but not limited to, nozzles, floss capsules and brush heads.
- Page 20 Jetpik® ; email contact: sales@jetpik.com www.jetpik.com Jetpik® is a trademark of Nucreatronics Electronic Technology (Shanghai) Co.,LTD. registered in USA, Europe, Brazil, China and other countries. Jetpik USA: Add: 16453 Old Valley Blvd. City of Industry, CA 91744, USA. Tel: +1 626-330-0808...