Route 66 – Sample Settings (Bass); Svt; Bass Comp; Big Dirty Bass (Od + Comp) - Visual Sound V3 Series Route 66 Manual

Route 66 – Sample Settings
V
3
DRIVE TREBLE
CLEAN MIX
A - B
VOICE
DRIVE
CLEAN MIX
A - B
VOICE
DRIVE
CLEAN MIX
A - B
VOICE

NOTES:

The V3 Series Route 66 is truly 2 pedals in 1 housing. For basic setup, use the Compressor
input and the Overdrive output. You may also change the order of effects by plugging your
guitar or bass into the OD input, use a short cable from the OD output to the Comp input, and
then go out from the Comp output. For anything other than the basic setup, just think of
Route 66 as 2 pedals.
By removing the 4 screws and the bottom cover, you can see 2 slide switches. Use these to
choose true bypass or our Pure Tone buffered bypass for each channel.
If you have a battery installed, make sure to unplug both Input and Output when not using.
Then again, why are you using a battery??? Get a 1 SPOT!
If you ever have any questions or problems with your Route 66, just go to the Visual Sound
website and contact our customer service. We're here to help you!
(Bass)
VOL
BASS

SVT

TREBLE VOL
BASS

Big Dirty Bass (OD + COMP)

TREBLE VOL
BASS

Growler (OD + COMP)

www.visualsound.net
COMP TONE
CLEAN MIX
ON - OFF

Bass Comp

COMP TONE
CLEAN MIX
TONE
ON - OFF
GATE
COMP TONE
CLEAN MIX
TONE
ON - OFF
GATE
VOL
TONE
GATE
VOL
VOL