Tilt Ball Switch - Uctronics Ultimate Starter Kit for Arduino Manual

Overview
In this lesson, you will learn how to use a tilt ball switch in order to detect small angle of
inclination.
Components Required
Name
UNO R3 or MEGA 2560

Tilt Ball Switch

Component Introduction
The tilt sensor is a component that can detect the tilting of an object. However it
works like a normal switch but through a different physical mechanism. This type of
sensor is the environmental-friendly version of a mercury-switch. It contains a metallic
ball inside that will conduct the two pins on and off when the sensor reaches a certain
angle and vice versa.
27
Lesson 7 Tilt Ball Switch
Qty
1
1
Name
DuPont Wire
220Ω Resistor
Qty
3
1