Rds Function - Optional - LG LX-M140A Owner's Manual

RDS Function - OPTIONAL

About RDS
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of musi-
cal selection and the correct time.
RDS Tuning
When a FM station containg RDS data is tuned in, the
unit will automatically display the station's call sign and
the RDS indicator will light in the Display Window as
well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS serv-
ices programme (PS) if transmitted by the station.
RDS Display Options
The RDS system is capable of transmitting a wide vari-
ety of information in addition to the initial call sign that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name,
broadcast network or call letters. Pressing RDS on the
front panel enables you to cycle through the various
data types in the sequence:
(PS FREQUENCY PTY
• PTY (Programme type recognition)- The programme
type is shown on the display window.
• RT (Radio text recognition)- The radio station's name
is displayed on the display window.
• CT (Time controlled by the channel)- Enable the unit
to receive the actual time and show it on the display
window.
• PS (Programme Service name)- The programme title
is displayed on the display window.
ote
Some RDS stations may not choose to include some of
these additional features. If the data required for the
selected mode is not being transmitted, the Display
Window will show a PTY NONE, RT NONE, CT NONE,
PS NONE message.
10
Programme Search (PTY)
A major benefit of RDS is its ability to encode broad-
casts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
shows the abbreviations used to indicate each PTY
along with an explanation of the PTY.
RT CT)
You may search for a specific Programme Type (PTY)
by following these steps:
1 1
Press TUNER/BAND to select FM mode.
2 2
Select a desired station by pressing
TUNING (
When the RDS transmission is received, the
display shows the program service name (PS) after
RDS indicator appears.
3 3
Press the RDS to select PTY mode.
4 4
To search for a different PTY, press the PRESET
(
to scroll through the list of available PTY types.
5 5
When the PTY is selected, press the
/
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength that matches the desired PTY type.
).
) while the last PTY in use is still displayed
within 5 seconds.