TP-Link TD-W8960N User Manual page 95

Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
4) How to enable DMZ Host: Log in to the Router, click the "Advanced Setup-NAT" menu
on the left of your browser, and click "DMZ Host" submenu. On the "DMZ" page, type
your IP address into the "DMZ Host IP Address" field, using 192.168.1.222 as an
example, remember to click the Save/Apply button.
4. I want to build a WEB Server on the LAN, what should I do?
Log in to the Router, click the "Advanced Setup-NAT" menu on the left of your browser, and
click the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add New, then on
TD-W8960N Wireless N ADSL2+ Modem Router User Guide
88