TP-Link TD-W8960N User Manual page 19

Note:
All the existed ATM&WAN service will be clean after click the "Save" button on this Quick Setup
page.
5. You will see the Finish screen below, click "Reboot" to save these settings.
6. Now, your ADSL Modem Router has been configured and is rebooting. Please do not power
off the Router while it's rebooting.
7. You will see the current configuration has been added to ATM Interface list
Service) and Layer2 Interface list
TD-W8960N Wireless N ADSL2+ Modem Router User Guide
Figure 3-7
Figure 3-8
(4.4.1 Layer2 Interface).
12
(4.4.2 WAN