Electrolux EWF 1272BW User Manual page 13

Hide thumbs Also See for EWF 1272BW:
Table of Contents

Advertisement

If you set something
incorrect, the indicator of the
button
flashes red three
times.
10.7 Starting a programme
without the delay start
Touch the button
• The indicator of the button
stops to flash and stays on.
• The programme starts, the door
locks, the indicator
The drain pump can operate
for a short time at the
beginning of the washing
cycle.
10.8 Starting a programme with
the delay start
The start of the programme can be
delayed by 9, 6 or 3 hours.
1. Touch the button
delay you want to set.
The indicator of the selected delay is on.
2. Touch the button
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you touch the button
. After touching the
button
you can only
cancel the delay.
To cancel the delay start:
1. Touch the button
appliance to pause.
2. Touch the button
indicator of the set delay goes off.
Touch the button
the programme immediately.
.
is on.
to choose the
:
to set the
until the
again to start
10.9 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Touch
.
The indicator of this button flashes.
2. Change the options.
3. Touch
again.
The programme continues.
10.10 Cancelling a programme
1. Press the button
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.11 Opening the door
While a programme or the delay start
operates, the appliance door is locked.
The indicator
is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
To open the door during the first
minutes of the cycle or when the delay
start operates:
1. Touch the button
appliance.
2. Wait until the indicator
3. You can open the door.
4. Close the door and touch the button
again. The programme (or the
delay start) continues.
ENGLISH
13
for some
to pause the
goes off.

Advertisement

Table of Contents
loading

Table of Contents