kitko w60502 Quick Start Manual

40mm wood 28mm wood
screws x 80 screws x 16
25mm nails x 20 Handles x 4
STEP 1
B A S
E P
E P
S I D
A N
E L
Screw base panel into side panel.
STEP 4
Nail back panel onto the side panels, base panels and
fixed shelf. Screw the back panel into the top support rail.
STEP 7
165mm
Attach leg to the base plate. Set the height of the adjustable
legs to 165mm. Repeat for the remaining legs.
Caution: Please ensure all cabinets are screwed into your timber stud wall.
If attaching to concrete, brick, steel or other sub surfaces seek advice from
your hardware specialist. WARNING: Do not allow children to climb on this
furniture – it may topple over and badly injure a child.
14mm wood
screws x 54
Stick on caps x 5
STEP 2
E L
A N
Screw support rail in position.
STEP 5
25mm
Turn the cabinet over. Mark out the dimensions shown.
STEP 8
B A C
Attach the front and back drawer box panels to the base drawer
box panel.
400mm
4 DRAWER CABINET
16mm pan head 40mm handle
screws x 16 screws x 8
Kickboard
clips x 2
Drawer runners x 4
front of cabinet
68mm
32mm
89mm
F R O
N T
P A N
E L
K P
A N
E L
Do not place toys or other child appealing items on top of this furniture.
For advice or any other questions you may have, call customer service on:
AU Customers: 1800 666 078 between 8:00am - 6:00pm E.S.T Monday to Friday
NZ Customers: 0800 522 663 between 8:00am - 6:00pm E.S.T Monday to Friday
90° angle
bracket x 1
STEP 3
E L
A N
E P
S I D
Attach remaining side panel.
STEP 6
Screw the base plates for the adjustable legs in position.
STEP 9
E L
F R O
A N
E P
S I D
H T
R I G
B A C
K P
A N
E L
Attach the side panels to the rest of the drawer box.
Repeat for the remaining drawers.
1
VER. 5
Adjustable
feet x 4
N T
P A N
E L
E L
P A N
I D E
T S
L E F