kitko 600mm BASE CABINET Assembly Instructions

40mm wood 28mm wood
screws x 20 screws x 4
25mm nails x 30 Handles x 2
STEP 1
B A S
E P
A N
E L
S I D
Screw base panel into side panel.
STEP 4
Plastic Bead
Use the plastic
bead to join back
panels together.
Nail back panel onto the side panels, base panels and fixed
shelf. Screw the back panel into the top support rail.
STEP 7
165mm
Attach legs to base plates. Set the height of the adjustable
legs to 165mm. Repeat for the remaining 3 legs.
Caution: Please ensure all cabinets are screwed into your timber stud wall.
If attaching to concrete, brick, steel or other sub surfaces seek advice from
your hardware specialist. WARNING: Do not allow children to climb on this
furniture – it may topple over and badly injure a child.
14mm wood 16mm pan head
screws x 6 screws x 16
Plastic lugs x 18 Stick on caps x 5
STEP 2
E L
A N
E P
Screw fixed shelf and support rails in position.
STEP 5
25mm
Turn the cabinet over. Mark out the dimensions shown.
STEP 8
Tap the plastic lugs into the screw holes
on the cabinet and door.
600mm
BASE CABINET
25mm handle Hinges x 4
screws x 4
Door buffer x 4 Joining beads x 2
F I X
E D
S H E
L F
front of cabinet
68mm
32mm
89mm
Do not place toys or other child appealing items on top of this furniture.
For advice or any other questions you may have, call customer service on:
AU Customers: 1800 666 078 between 8:00am - 6:00pm E.S.T Monday to Friday
NZ Customers: 0800 522 663 between 8:00am - 6:00pm E.S.T Monday to Friday
90° angle
bracket x 1
Kickboard
clips x 2
STEP 3
E
S I D
E L
P A N
Attach remaining side panel.
STEP 6
Screw the base plates for the adjustable legs in position.
STEP 9
1
VER. 5
Adjustable
feet x 4