Chapter 2 Installation Guide; Before You Begin; Installing The Drivers - TP-Link TL-WN322G User Manual

Chapter 2 Installation Guide

2.1 Before You Begin

Before installing the new drivers of your TL-WN322G 54M Wireless USB Adapter, you need
to disable all of the Wireless LAN drivers that you have installed.
During the installation, Windows 98/ME/2000/XP/2003/64bit XP may need to copy systems
files from its installation CD. Therefore, you may need a copy of the Windows installation
CD at hand before installing the drivers.

2.2 Installing the Drivers

Follow the steps below in order to install the TL-WN322G 54M Wireless USB Adapter
drivers:
Insert the Resource CD into your CD-ROM drive, Click the Start button and choose
Run. In the field that appears, enter F:\XXX\Setup.exe(if "F" is the letter of your
CD-ROM drive; XXX represents the setup program path, which is labeled on the
Resource CD).
Once the setup begins you will see the Install Shield Wizard, as the image depicts
below.
Click on the Next button to continue.
Select the location where you would like the driver installed. Click on the Browse button
to change the directory, or click on the Next button to continue using the default
directory.
TL-WN322G 54M Wireless USB Adapter User Guide
Figure 2-1 Install driver wizard
- 5 -