Advertisement
Important information necessary for manual consultation:
1) In all the technical descriptions , the location of all accessories and various machine parts is always
given in relation to the control and work position.
This machine has been designed for use by a single operator for safety reasons.
2) In the technical descriptions, to be able to understand the text more clearly,all mechanical details are
described with their part number expressed in brackets alongside. These details can be easily seen in
the blow-up drawings contained in the appropriate catalogue supplied with the machine.
3) All operations described in this instruction manual must be carried out ONLY AFTER having:
- turned off the machine (MAIN SWITCH IN O POSITION)
- disconnected the machine cable from the main electrical supply.
- closed the compressed air draft tap located near the filter-reducer block mounted on the
machine, and emptied all the compressed air from the pneumatic installation.
4) All adjustment and maintenance operations described as follows must be carried out by expert qualified
personnel in order to avoid any injuries, or damage to the machine.
5) If You will verify some differences between article codes inside the manual and inside the exploded
views, You have to refer to the codes inside the exploded views (also to order the spare parts).
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
Advertisement
