Advertisement
Available languages
Available languages
BM 2610033170 08-13_BM 2610033170 08-13.qxp 8/13/13 1:21 PM Page 6
Charger Indicators, symbols and meaning (model BC430)
If the indicator lights are "OFF", the charger
is not receiving power from power supply
outlet.
If the green indicator light is
"ON", the charger is plugged in
but the battery pack is not
inserted, or the battery pack is fully charged
and is being trickle charged.
If the green indicator light is
"BLINKING", the battery pack is
being
charging will automatically stop when the
battery pack is fully charged.
Plug charger cord into your standard power
outlet, then insert battery pack into charger
(Fig. 2).
The charger's green indicator light will begin to
"BLINK". This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery pack is
fully charged.
When the indicator light stops "BLINKING"
(and becomes a steady green light) fast
charging is complete.
The battery pack may be used even though
the light may still be blinking. The light may
require more time to stop blinking depending
on temperature. When you begin the charging
process of the battery pack, a steady red light
could also mean the battery pack is too hot or
too cold.
The purpose of the green light is to indicate
that the battery pack is fast-charging. It does
not indicate the exact point of full charge. The
light will stop blinking in less time if the battery
pack was not completely discharged.
When the battery pack is fully charged, unplug
the charger (unless you're charging another
W RNING
Battery packs
BAT411 through BAT425
Voltage rating 10.8V/12V
Charger (model BC430)
Voltage rating 120 V
For most up to date battery compatibility, please refer to www.boschtools.com
fast-charged.
Fast-
Charging Battery Pack (model BC430)
This charger will only charge the following batteries:
MAX
60 Hz
"SAVe THeSe INSTRUCTIoNS"
If the red indicator light is "ON",
the battery pack is too hot or cold
for fast-charging. The charger will
switch to trickle charge, until a suitable
temperature is reached, at which time the
charger will switch automatically to fast-charging.
If the red indicator light is
"BLINKING", the battery pack
cannot accept a charge or the
contacts of the charger or battery pack are
contaminated. Clean the contacts of the
charger or battery pack only as directed in
these operating instructions or those supplied
with your tool or battery pack.
battery pack) and slip the battery pack back
into the tool.
B TTERY
RED
LIGHT
GREEN
LIGHT
-6-
FIG. 2
P CK
CH RGER
Advertisement
