Miele KF 2981 VI Operating And Installation Instructions page 19

When planning installation niches,
please note that the niche into which
the refrigeration appliance with the
side panel heater is installed must be
3/16" (4 mm) wider (see "Installation
– Building-in dimensions").
If the partition wall a is thicker than
6 5/16" (160 mm), you do not need the
side-by-side installation kit, nor the side
panel heater.
. . . without partition wall
If the appliances are to be installed next
to each other without a partition wall
between them, they will need to be
joined together with the side-by-side in-
stallation kit. In addition, you must in-
stall the side panel heater to prevent
condensation from forming and any re-
sulting damage.
Installation
19