Table of Contents
Advertisement
Quick Links
CUTOUT TOOL - 18 VOL
CUTOUT TOOL - 18 VOL
CUTOUT TOOL - 18 VOL TS
CUTOUT TOOL - 18 VOL
CUTOUT TOOL - 18 VOL
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 MISSION OAKS BLVD., CAMARILLO, CA 93011
VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM
Copyright © 2005 by Harbor Freight Tools
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
92879
®
. All rights reserved. No portion of
TS TS
TS TS
Advertisement
Table of Contents
Summary of Contents for Drill Master 92879
- Page 1 TS TS CUTOUT TOOL - 18 VOL TS CUTOUT TOOL - 18 VOL CUTOUT TOOL - 18 VOL 92879 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 MISSION OAKS BLVD., CAMARILLO, CA 93011 VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM Copyright © 2005 by Harbor Freight Tools ®...
-
Page 2: Specifications
Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Page 2 SKU 92879 For technical questions, please call 1-800-444-3353... - Page 3 “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of injury or damage to the unit. Page 3 SKU 92879 For technical questions, please call 1-800-444-3353...
- Page 4 14. Always wear ANSI approved safety impact eye goggles and heavy work gloves when using this tool. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Harbor Freight Tools. Page 4 SKU 92879 For technical questions, please call 1-800-444-3353...
-
Page 5: Battery Precautions
After initial 8 hour charge, never charge Battery for more than 2 hours continuously. Charger Adapter should not be left plugged in or charging for more than 8 hours. Page 5 SKU 92879 For technical questions, please call 1-800-444-3353... -
Page 6: Charging Battery
The Charging Indicator turns red, indicating charging. Charge the new Battery for eight hours. Subsequent charges should take approximately one hour. When charging is complete, the Charging Indicator turns green. Unplug the Charger Adapter from the electrical outlet. Page 6 SKU 92879 For technical questions, please call 1-800-444-3353... -
Page 7: Controls And Indicators
Wheel Screw (8) Wheel (1) Pivot Screw (6) Collet Nut (14) Ruler (2) Spindle Lock (22) Button Circle Cutter Jig Side Handle On / Off Switch (26) Ball Handle (5) Page 7 SKU 92879 For technical questions, please call 1-800-444-3353... -
Page 8: Adjusting Cutting Depth
With the Switch (26) in the Off position, align the Battery (36) mounting guides (A) onto the receiving guides of the tool handle bottom. Push the Battery all the way in until it stops. Page 8 SKU 92879 For technical questions, please call 1-800-444-3353... - Page 9 Make a test cut on scrap wood to ensure the cutting radius is correct. Nut (3) Screw (4) Wheel (1) Ball Handle (5) Wheel Screw (8) hidden Pivot Screw (6) Page 9 SKU 92879 For technical questions, please call 1-800-444-3353...
-
Page 10: Inspection, Maintenance, And Cleaning
After each use, blow out the Motor vent holes with compressed air to prevent the buildup of dust and particles. Periodically wipe the collet, adapters, and cutting bits with a light oil to prevent rust. Review Battery Precautions on page 5 for maintenance information. Page 10 SKU 92879 For technical questions, please call 1-800-444-3353... -
Page 11: Parts List
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 11 SKU 92879 For technical questions, please call 1-800-444-3353... -
Page 12: Assembly Drawing
ASSEMBLY DRAWING Page 12 SKU 92879 For technical questions, please call 1-800-444-3353...