ADJUSTMENT OF VIDEO / CHROMA CIRCUIT
Measuring
Item
instrument
WHITE
Signal
BALANCE
generator
(Low Light)
adjustment
Remote
control unit
BRIGHT
BRIGHT
R CUTOFF
G CUTOFF
WHITE
Signal
BALANCE
generator
(High Light)
adjustment
Remote
control unit
R DRIVE
Test point
Adjustment part
R CUTOFF
G CUTOFF
B CUTOFF
SCREEN VR
B CUTOFF
G DRIVE
B DRIVE
HIGH LIGHT
B DRIVE
1. Input the black and white signal ( color off ).
2. Select the [LOW LIGHT] MODE from the SERVICE MENU.
3. Set the initial setting value of "R CUTOFF", "G CUTOFF" and
"B CUTOFF" with the to keys of the remote control unit.
4. Display a single horizontal line by pressing the key of the
remote control unit.
5. Turn the screen VR all the way to the left.
6. Turn the screen VR gradually to the right from the left until
either one of the red, blue or green colors appears faintly.
7. Adjust the two colors of CUTOFF which did not appear until the
single horizontal line that is displayed becomes white using the
to keys of the remote control unit.
8. Turn the screen VR until the single horizontal line is displayed
faintly.
9. Press the key to cancel the single horizontal line mode.
The
EXIT key is the cancel key for the WHITE BALANCE.
Remote Control Unit key assign
H.LINE ON
1
R CUTOFF
4
R CUTOFF
7
1. Input the black-and-white signal ( color off ).
2. Select the [HIGH LIGHT] MODE in the SERVICE MENU.
3. Set the initial setting value of "R DRIVE" and "B DRIVE" with
the ,
, and keys of the remote control unit.
4. Adjust the screen until it becomes white using the ,
,
and keys of the remote control unit.
The
EXIT key is the cancel key for the WHITE BALANCE.
Remote Control Unit
key : H.LINE ON
key : H.LINE OFF
key : EXIT
key : R DRIVE $
key : B DRIVE $
key : R DRIVE %
key : B DRIVE %
No.51686
AV-27D201
AV-32D201
Description
H.LINE OFF
EXIT
3
2
G CUTOFF
B CUTOFF
6
5
G CUTOFF
B CUTOFF
8
9
key assign
23