Timer Program Recording - Toshiba W-604 Owner's Manual

RECORDING

Timer Program Recording

The programmable timer allows you to record up to 6 different programs over one month.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Make sure that the clock is set correctly (page 15).
• Store the channels on the VCR (pages 16 and 17).
• If you record cable channels, finish the cable box set-up (pages 12), and turn on the cable box.
1 2 3
4
4
5 6
7 8 9
0 100
10
PLAY
3-8
REW FF
STOP
3
CANCEL
2, 9
Timer Programming Procedure
Example: To record cable channel 25 in the SP tape speed from
9:30 p.m. until 10:00 p.m. on August 30. Today is August 25.
1
Load a cassette with the safety tab attached.
2
Press PROG . to display the MENU screen.
3
Select "PROGRAM" using FF or
REW , and press ENTER .
4
Move to the next using FF , and
select the channel number 25 by
pressing number buttons 2 and 5,
PLAY or STOP.
• To record a cable program from the connected cable box:
Enter the cable channel number by number buttons , PLAY or
STOP.
If your cable box is not remote-controllable, choose the desired
channel (1 to 125) on the cable box.
To make corrections:
Press REW to move back to the item, or FF to forward.
n
CH DATE O OFF SPD
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
n
E D : PROG
n
CH DATE O OFF SPD
2 5 -/-- -:- - -:- - SLP
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
n
E D : PROG
(Continued)
25