OEM Tools 24660 Operating Instructions

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts. If any damage is observed, a shipping damage
claim must be filed with carrier. DO NOT use the OEMTOOLS
Drill if broken, bent, cracked or damaged parts (including labels)
are noted. Any Drill that appears damaged in any way, operates
abnormally or is missing parts should be removed from service
immediately. If you suspect that the Drill was subjected to
shock load (a load that was dropped suddenly, unexpectedly,
etc.), immediately discontinue use until it has been checked by
a factory authorized service center.
* Voltage is measured without workload. Maximum initial battery
voltage after charging. Nominal voltage is 18 Volts.
WARNING
The following safety information is provided as a guideline to help you operate your Drill under the safest possible conditions.
Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or
not followed. The following safety instructions are to provide the user with the information necessary for safe use and operation.
Please read and retain these instructions for the continued safe use of your service system. Failure to follow instructions listed
below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows
these safety instructions as well.
Explanation of Safety Signal Words
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES:
Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS
arising from modification. We strongly recommend this product is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
WARNING:
This product can expose you to chemicals, including acrylonitrile, which are known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
11/18
2018 OEMTOOLS
™
20V MAX* LITHIUM-ION
3/8" DRIVE CORDLESS DRILL
™
Product!
™
1
24660
cannot be responsible for issues
™