Table of Contents
Advertisement
Quick Links
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed,
a shipping damage claim must be filed with carrier. Do
not use the
Drill if broken, bent, cracked, or
OEMTOOLS
™
damaged parts (including labels) are noted. Any Drill that
appears damaged in any way, operates abnormally, or is
missing parts should be removed from service immediately.
If you suspect that the Drill was subjected to shock load
(a load that was dropped suddenly, unexpectedly, etc.),
immediately discontinue use until it has been checked by
a factory authorized service center.
WARNING
The following safety information is provided as a guideline to help you operate your Drill under the safest possible conditions.
Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or
not followed. The following safety instructions are to provide the user with the information necessary for safe use and operation.
Please read and retain these instructions for the continued safe use of your service system. Failure to follow instructions listed
below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows
these safety instructions as well.
Explanation of Safety Signal Words
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES:
Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS
arising from modification. We strongly recommend this product is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first
contacted customer service to determine if it can or should be performed on the product.
4/18
2018 OEMTOOLS
™
Product!
™
1
24669
3/8" DRILL
cannot be responsible for issues
™
Advertisement
Table of Contents
Related Manuals for OEM Tools 24669
Summary of Contents for OEM Tools 24669
- Page 1 Operating Instructions and Parts Manual 24669 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property.
-
Page 2: Power Tool Safety
Operating Instructions and Parts Manual 24669 3/8" DRILL POWER TOOL SAFETY 4. Remove any adjusting key or wrench before turning the power tool ON. A wrench or a key left attached WARNING: Read all safety warnings and instructions. to a rotating part of the power tool may result in Failure to follow the warnings and instructions may result personal injury. -
Page 3: Guidelines For Extension Cords
Operating Instructions and Parts Manual 24669 3/8" DRILL Use a separate electrical circuit for your power tools. WARNING: Know your drill. DO NOT plug in the This circuit must not be less than 14 gauge wire and drill until you have read and understand this Instruction should be protected with either a 15A time delay fuse Manual. -
Page 4: Product Specifications
Operating Instructions and Parts Manual 24669 3/8" DRILL PRODUCT SPECIFICATIONS WARNING: To avoid fire or toxic reaction, never use gasoline, naphtha, acetone, lacquer thinner, or similar Motor: 4 Amp, 120V, 60Hz highly volatile solvents to clean the tool. Variable Speed:... -
Page 5: Removing Drill Bits
Operating Instructions and Parts Manual 24669 3/8" DRILL 2. Insert the bit into the chuck the full length of the jaws or To lock the trigger switch in the ON position, pull back on until the spiral portion of the bit is near the chuck jaws. -
Page 6: Removing The Chuck
Operating Instructions and Parts Manual 24669 3/8" DRILL RETIGHTENING A LOOSE CHUCK When drilling metals, use light oil on the drill bit to keep it from overheating. The oil will prolong the life of the drill After installing a chuck that has previously been removed, bit and improve the cutting action. -
Page 7: Parts Diagram
Operating Instructions and Parts Manual 24669 3/8" DRILL PARTS DIAGRAM PARTS LIST This symbol designates that this tool is listed with U.S. and Canadian requirements by ETL Testing Laboratories, Inc. and conforms to UL Std. 60745-1, 60745-2-1, 60745-2-2. Certified to NOTE: Not all components of the Drill are replacement CAN/CSA Std. - Page 8 Operating Instructions and Parts Manual 24669 3/8" DRILL OEMTOOLS ONE YEAR WARRANTY ™ For up to one year from the date of purchase of this OEMTOOLS product, if you find any defect in material or ™ workmanship (through normal usage), return it to the place of purchase or to OEMTOOLS for repair or replacement at ™...