Samsung RT28 Series User Manual page 29

STEP 4 Initial settings
By completing the following steps, the
refrigerator should be fully functioning.
1. Plug the power cord into the wall socket
to turn the refrigerator on.
2. Open the door, and check if the interior
light lights up.
3. Set the temperature to the coldest, and
wait for about an hour.
4. Wait until the refrigerator reaches the
set temperature. Now the refrigerator is
ready for use.
STEP 5 Final check
When installation is complete, confirm that:
• The refrigerator is plugged into an
electrical outlet and grounded properly.
• The refrigerator is installed on a
flat, level surface with a reasonable
clearance from the wall or the cabinet.
• The refrigerator is level and is sitting
firmly on the floor.
• The door opens and closes freely, and
the interior light turns on automatically
when you open the door.
RT3000TH_DA68-03374F-00_EN+HI.indd 29
29
2019-12-05 3:31:54