Marking Desired Scenes - Toshiba SD-V396SU Owner's Manual

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
DVD
Marking the scenes
VCD
CD
1
Press MARKER during playback.
MARKER
2
Select the blank Marker using
Then press ENTER at the desired scene.
• Repeat this procedure to set
the other 2 scenes.
SET +
CH – CH +
ENTER
SET –
3
Press MARKER to remove this display.
MARKER
Notes:
• Some discs may not work with the marking operation.
•
The marking is canceled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to
appear.
2C53601A (E)p50-53
or .
51
DVD
Returning to the scenes
VCD
CD
1
Press MARKER during playback or stop mode.
MARKER
2
Press or to select the Marker 1-3.
SET +
CH – CH +
ENTER
SET –
3
Press ENTER.
SET +
Playback starts from the marked
CH – CH + scene.
ENTER
SET –
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
3/10/04, 11:34
L / M
MARKER
ENTER
CANCEL
51