Advertisement
Using the Stem Mount
Remove existing stem cap from bicycle.
1
Use existing stem bolt to install Smartphone
Holder stem mount on to your bicycle stem.
Connect holder to stem mount
2
using short bolt and adjust angle
before full tightening.
1
STEM BOLT
Using the Handlebar Clamp
Connect holder to handlebar clamp
1
using short bolt and adjust angle before
full tightening.
Connect handlebar clamp to bar
2
using rubber shims as needed.
Use thumb screw; tighten to
secure the handlebar clamp.
Need help?
Email us at service@designbydelta.com
& we'll help solve your issue.
Delta Cycle Corporation 36 York Avenue, Randolph, MA 02368 USA / 800-474-6615 / www.designbydelta.com
2
2
Assembly video
Visit designbydelta.com/downloads
IMPORTANT
SAFETY NOTE
Never loosen the
stem clamp bolts.
1
IMPORTANT
SAFETY NOTE
Do not attach clamp
to any tapered section
of your handlebar.
Advertisement
