Advertisement
Install Drywall
4A
4-1/2"
ROUND COLLAR
For round trims, mark a 4-1/2" diameter circle on drywall.
1
Cut out the marked section.
For square trims, mark a 4-1/2" square on drywall. Cut out
the marked section.
4B
2
DRYWALL
Align the cut out section of drywall with the collar and
2
install drywall.
WARNING:
Risk of Fire:
intended to be in contact with or covered with
combustible materials and insulation. Do not
install insulation within 3 inches of the housing
sides or above in such a manner to entrap heat.
4-1/2"
SQUARE COLLAR
COLLAR
The housing is not
Install Plaster Ring
(For Flangeless Versions)
5A
ROUND PLASTER RING
CUT OUT
ALLEN
WRENCH
SET SCREW
JOIST
SHORT SET SCREW
LONG SET SCREW
1
Insert the plaster ring completely into the collar/ceiling
and secure them in place with the provided set screws and
Allen wrench.
NOTE: Longer set screws have been provided for
instances where the plaster ring does not reach the
collar and must be secured to the inside of the ceiling
cutout. Use the short set screws if the trim is installed in
the collar.
6
SQUARE PLASTER RING
1
1
1
1
1
TAB
TRIM HOLDER
TAB
CUT OUT
CEILING
Advertisement
