Toshiba DK 24,DK 56, DK 96 User Manual page 14

STRATA DK
CO Line Number:
1. Incoming Call
N O . N N N
L I N E 1 0 R I N G I N G
2. When Call Is Answered
N O . N N N
A N S W E R E D L I N E 3
3. Hold
H O L D L I N E 1 0
J A N 0 1 S U N 1 2 : 1 9
4. Hold Recall
H O L D L I N E N N N
L I N E 1 0 R E C A L L
5. Outgoing
N 0 . N N N
U S I N G L I N E 6
6. CO Line Queuing
(Callback)
N 0 . N N N
L I N E 3 A C B
Date/Time:
N 0 . N N N
M A Y 2 4 M O N 1 2 : 0 5
1-6
Incoming Central Office (CO) call—if your station is programmed for
incoming ringing on that CO line.
Transferred CO call—CO line is transferred to your station in the ringing
state by another station.
Camped-on CO call—CO line was camped-on to your busy station and
rings your station when you hang up.
The display changes to indicate calling status.
You have put a CO line call on hold at your station.
Held call automatically recalls your station after a programmed period of
time.
When you manually select a CO line, it is displayed. This display is
replaced by the dialed number as you dial.
When the CO line queuing feature rings back to your station with an
available CO line, that line number will be displayed.
Press the Page button to display date/time when talking on a
1.
Central Office (CO) line (Soft Keys must be off before the call is
started).
2. The date/time is adjusted on a system-wide basis by the station
located in port 00 (usually station 200).
LIQUID CRYSTAL DISPLAY