Advertisement
MANUALE
INSTALLATORE
JJt1rqnothermostat
8
The chronothermostat function is used to program on/off automatically of the thermostove during the
week period.
To enter the programming press the P3 key for approx. three seconds, the display D1 wil! visualize
parameter "UT01": pressing P3 a few times and referring to the table below the thermostove may
be programmed according to personal needs.
To exit the programming phase at any time press the P4 key (ON).
The parameters of the chronothermostat are the following:
21
Parameter
Description
Set Values
UT01
Aetivating and disaetivating erono
OFF; Day 1, ....Day7
Set day of week
UT02
Set eurrent hour
From 00 to 23
UT03
Set eurrent minutes
From 00 to 60
UT04
Set parameter 55
Refilling pellet
Aspiration ot tumes
UT05
Regulating 10hour Stove on
From 00:00 to 23:50 with 10 minute
step
UT06
Regulating 10hour stove oft
From:OO to 23:50 with 10 minute
step
UT07
Choose weekday in whieh to aetivate 10hour
Between on/oft tor days trom 1 a 7
UT08
Regulates 2nd hour stove on
From 00:00 to 23:50 with 10 minute
step
UT09
Regulates 2nd hour stove oft
From 00:00 to 23:50 with 10 minute
step
UT10
Choose weekday in whieh to aetivate2nd hour
Between on/oft tor days trom 1 a 7
UT11
Regulates 3rd hour stove on
From 00:00 to 23:50 with 10 minute
step
UT12
Regulates 3rd hour stove oft
From 00:00 to 23:50 with 10 minute
step
UT13
Choose weekday in whieh to aetivate3rd hour
Between on/oft tor days trom 1 a 7
UT14
Regulates 4th hour stove on
From 00:00 to 23:50 with 10 minute
step
UT15
Regulates 4th hour stove oft
From 00:00 to 23:50 with 10 minute
step
UT16
Choose weekday in whieh to aetivate4th hour
Between on/oft tor days trom 1 a 7
Advertisement
