Advertisement
FUNCTIONS
Charging Your Speaker:
Before you start using the speaker for the first time, it's a good idea
to charge it completely.
Plug the included USB charging cable into the DC IN Jack. Plug
the other end of the USB cable into a power source. The charging
indicator will illuminate RED while the speaker is charging. After
the charge is complete the charging indicator will turn off.
NOTE: When the battery level is low an audible notification will
playback. The speaker can be used while the speaker is charging.
TURN ON:
Switch the ON/OFF switch (1) to the ON position. The clocks
display will turn on. Press and hold the M (10) button to activate
the BLUETOOTH / FM / ALARM functions. The speaker will emit
a tone and the LED indicator will begin to blink. Pause for 3 - 5
seconds and the speaker will go to Bluetooth pairing mode to pair
with a compatible bluetooth device.
PAIRING AND CONNECTING:
Go to your bluetooth settings on your compatible device, make sure
the speakers LED indicator is blinking (If the speakers indicator isn't
blinking then the speaker is not in bluetooth pairing mode. Switch
the speaker off and on again.
Choose CHARM from the pairing options on your bluetooth device.
(If you do not see CHARM from the list, choose "Scan" from the
menu and CHARM will pop up). Select the Charm and the speaker
will reproduce an audible sound and the LED will stay illuminated
when the unit has successfully paired with the compatible device.
NOTE: The process of enabling bluetooth and connecting varies
from device to device.
Press and hold the
disable the bluetooth connection.
button for approximately 3 seconds to
FUNCTIONS CONTINUED
Bluetooth Wireless Connection Tips
•
Make sure the Bluetooth compatible device is turned ON.
•
Make sure there's nothing plugged into the speaker's AUX IN
jack when you're trying to use bluetooth.
•
The Bluetooth wireless connection works up to a range of 33
feet (10 meters). This range may vary, however, based on
other factors, such as obstetricals and other wireless devices
the bluetooth performance may be limited.
•
Default pass-code "0000".
Music Playback:
Button
Press this button to Play or Pause your media.
Pressing the "+" button momentarily will increase the volume. Press-
ing and holding the button down will change to the next media track.
Pressing the "-" button momentarily will decrease the volume. Pressing
and holding the button down will change to the previous media track.
NOTE: If the AUX Cable is used the Previous/Next option will be disabled.
CLOCK / ALARM FUNCTION:
SETTING THE CLOCK
Press and hold the TIME (11) button, the hour indicator will start to
blink. Now you will be able to set the hours by pressing the + to in-
crease and - to decrease the hours. Press the
the hours and program the minutes. Using the same buttons you
used for the hours and press the
Press the TIME (11) button to save and exit the clock setup.
button to confirm
button to confirm your entry.
Advertisement
