Table of Contents
Advertisement
El-04189
6. MAIN
CONTROL
LOCK
The control lock has eight marked positions.
There are four control keys which will operate these locks, these are:
This key (OP) will access
REG and OFF positions.
the
This key (MAl)
will access the
PR2, PRl , REG, OFF and X po-
sitions.
This key (MA2) will access the
PR2, PRl, REG. OFF, X and Z
positions.
This key (SE) will access
all
eight positions.
(SE key may be kept with your
TEC representative
for servic-
ing.)
J
Control lock
PR2 -
Date, time, machine No., store code, store address, Bar Code Format, and PLU can be pro-
grammed.
PRl -
PLU unit price, direct key and Spacing of a label etc. can be programmed
or changed.
REG
Machine
can be used as a scale and register the data on a label.
OFF -
Machine
is locked and any further key entry is impossible.
x-
Day-Total
etc. can be read out and printed out on the paper or label.
The data-memory
is not reset to zero.
,
Z
-
Day-Total
etc. can be printed out on the paper or label and the data-memory
is reset to zero.
(RAM CLEAR) -
Used to clear all memories (all Total and PLU file).
(Depress m
Key).
(TEST) I
Used to indicate all test status in displays.
.
-7-
Advertisement
Table of Contents
