Getting Started - Biomark GLOBAL POCKET READER PLUS Quick Start Manual

GETTING STARTED

The GPR Plus comes supplied with six AAA rechargeable
NiMH batteries, which must be inserted, according to the
diagram below, and fully charged prior to use (steps 1
through 3).
If preferred, six AAA alkaline (non-rechargeable) batteries
can be used to power the reader, BUT they should never
be charged to avoid risk of fire (follow only step 1).
Step 1: Unscrew the batteries compartment cover
retention screw, located on the back of
reader at the bottom and remove the
batteries according to the polarity indicators.
cover and tighten the screw.
WARNING: BATTERIES MUST BE INSTALLED AS
PICTURED ABOVE TO AVOID EXCESSIVE HEAT OR
PERMANENT DAMAGE TO THE READER DURING
CHARGING
QUICK START GUIDE
GPR Plus Reader
the GPR Plus
cover. Install the
Replace the
3