Level Adjustment; Cleaning - TEC EM1-31015 Owner's Manual

EMl-31015D
8. LEVEL ADJUSTMENT
Set the scale on a stable and level surface. Level
the scale by turning the adjustable legs so that the
air bubble is inside the center circle.
@eve1 Gauge@
Correct Incorrect
When the air bubble moves toward the left side,
When the air bubble moves toward rear, turn the
turn the right adjustable legs clockwise.
front adjustable legs clockwise.
9. CLEANING THE PRINT HEAD
If the print head is dirty, clear printing will not be produced. It is recommended to clean the head
with thermal head cleaner everyday before starting operation using the following procedure:
1. Remove the printer cover and label cassette.
Then push the head-up lever in the direction
indicated by the allow.
the figure to the right with the thermal head
cleaner.
Then set the label cassette, and push down the
print head.
NOTE: Be careful not to damage the print head
when cleaning.
hermal Head
Cleaner
- 15 -