CSL CS2369 Quick Manual & Instruction Manual page 13

SAVED FILES
1. Select the Saved Results icon
2. Then select either the Multi Cellular icon
descending order by time
3. Select the file you wish to view. Results will now be shown in the same format as per the 'RESULTS'
section
DELETING SAVED FILES
1. Select and hold the file you wish to delete. A
corner
2. Press delete. This file has now been deleted
SAVED FILE DOWNLOAD
1. Ensure the Signal Analyser is switched on
If the device is switched off and connected to the USB port on a PC/Laptop this will
2. Connect Signal Analyser via a USB lead to your PC/Laptop
3. Once connected click on Start then select Computer. The Signal Analyser files will be shown under
devices with removable storage
4. Select Analyser
5. Select the applicable folder (Cellular Snapshot, Cellular Survey , Wi-Fi Snapshop and Wi-Fi survey)
and your results will be displayed as a CSV file.
6. These files can now be moved to your required folder or displayed as a CSV file.
You cannot read/write files and run a survey while the Signal Analyser is connected to
SETTINGS
Enter the settings menu
ICON
Brightness Icon
Languages Icon
Time Icon
Auto-Off Icon
Default Survey Icon
Sounder Icon
Power Save Icon
Device Information
Icon
Factory Reset Icon
. Results will be shown in descending order by time
charge the device only
the USB port, this may cause the unit to crash
DESCRIPTION
Adjust brightness
Change device language
Set time/date
Define how long the device stays powered on
with no action
Define which survey the quick survey button on
the front of the device executes
Turn sound on/off
Power saver to send radio module to sleep
View firmware version
Restore factory defaults
or Wi-Fi . Results will be shown in
Delete icon will now show in the top right hand
Delete
13
FUNCTION
Increase/decrease
brightness
Select language
Set time/date
Set auto-off time
Select survey
Turn sound on/off
Turn power save on/off
View firmware version,
Radio module, Radio
firmware, IMEI, SIM status
Complete a factory reset
back to default settings